Injection Mold Design Services
Turn your plastic part concepts into high-yield, production-ready injection molds. Our injection mold design services deliver robust core and cavity engineering, advanced mold flow simulation, optimal cooling layouts, and complete 3D/2D CAM manufacturing packages.

Comprehensive Injection Mold Design Services
From initial prototype tooling to high-cavitation production molds, we provide precision-engineered injection mold design services tailored to your resin, cycle time, and production volume targets.
Core & Cavity CAD Design
Advanced 3D surface modeling of core and cavity inserts with precise parting line calculation, optimized shut-offs, and interlocking taper locks for flash-free molding.
- Complex parting line generation
- Interlocking side & corner locks
- Interchangeable cavity sub-inserts
Design for Manufacturability (DFM)
In-depth DFM reviews identifying sink mark risks, draft angle violations, non-uniform wall thickness, and weld lines before steel cutting begins.
- Wall thickness transitions analysis
- Draft angle inspection (0.5° to 3°+)
- Rib, boss, and gusset optimization
Mold Flow Simulation & Filling Analysis
Computational mold flow simulation assessing fill time, injection pressures, clamp tonnage, fiber orientation, air traps, and volumetric shrinkage.
- Volumetric shrinkage & warpage forecasting
- Air trap venting placement
- Clamp tonnage calculation
Hot Runner & Cold Runner Systems
Engineered feed systems comparing hot runner valve gates, hot tip nozzles, and cold runner 2-plate or 3-plate configurations to eliminate material waste.
- Naturally balanced runner channels
- Valve-gate and thermal tip hot runners
- Sub-gate & cashew gate auto-degating
Conformal & Turbulent Cooling Layouts
Thermal cooling circuits designed with baffle, bubbler, and 3D conformal channels maintaining high Reynolds numbers for accelerated, uniform heat dissipation.
- Reynolds number > 4,000 turbulent flow
- Conformal cooling for hot spot elimination
- Independent core/cavity temperature circuits
Side Actions, Sliders & Undercut Lifters
Kinematic mechanical slides, hydraulic core pulls, and angled lifters designed to reliably release deep internal and external undercuts during demolding.
- Mechanical heel block locking slides
- Angled guided lifters for internal undercuts
- Wear-resistant bronze & Ampco gib plates
Multi-Cavity & Family Mold Tooling
High-production 8, 16, 32, and 64-cavity tooling layouts engineered with balanced flow paths and modular cavity plates for maximum press productivity.
- H-pattern and radial flow balancing
- Individual cavity pressure transducers
- Family mold volume calibration
Standard Mold Base Architecture
Tool architectures based on global industry standards (DME, Hasco, LKM, Misumi, Meusburger) ensuring worldwide component availability and simple maintenance.
- A/B plate thickness optimization
- Precision leader pins and bronze bushings
- Standard ejector plates and stop pins
Full 3D Assemblies & 2D GD&T Drawings
Complete manufacturing package including parametric 3D CAD files (STEP, Parasolid, native) and 2D toolmaking drawings with ASME Y14.5 GD&T.
- Detailed Bill of Materials (BOM)
- Tight tolerance GD&T callouts (±0.005mm)
- Direct CNC, EDM & Wire-EDM ready files
Injection Mold Types We Design
Every plastic part presents unique geometry and volume demands. We design the right mold type to optimize your capital expenditure and part cost.
Two-Plate Molds
The most cost-effective and reliable mold configuration, ideal for edge, direct, and tunnel gated parts with straightforward ejection requirements.
Three-Plate Molds
Features two parting planes for automatic gate separation on cold runner multi-cavity tools, allowing center pinpoint gating without hot runners.
Hot Runner Systems
Manifold-heated runner systems that keep plastic molten up to the cavity gate, eliminating runner scrap and drastically cutting cycle times.
Unscrewing Molds
Automated hydraulic, rack-and-pinion, or servo-motor unscrewing mechanisms designed for caps, closures, and internally threaded plastic components.
Overmold & 2K Dual-Shot
Rotary table and transfer tooling engineered for multi-material injection molding, bonding rigid thermoplastics with soft-touch TPE/TPU elastomers.
Insert Molds
Specialized tooling engineered to encapsulate metal threaded inserts, stampings, wire leads, or electronic subassemblies directly within molded plastic.
SPI Mold Classification Standards
We design injection molds according to Plastics Industry Association (SPI) standards, matching steel selection to your production cycle expectations.
Our Proven 6-Step Injection Mold Design Workflow
From initial STEP model analysis to final mold trial support, our rigorous workflow eliminates tooling surprises and guarantees part precision.
CAD Part & DFM Review
We analyze your 3D part geometry for draft angles, nominal wall thickness consistency, parting line viability, and potential tooling traps.
Mold Flow Simulation
Computational filling and cooling analysis validates gate locations, injection pressure, clamp tonnage, weld lines, and predicted part warpage.
Preliminary Mold Architecture
We create the core/cavity layout, select standard mold base sizing, define runner and gate types, and establish the ejection strategy.
Detailed 3D Assembly Design
Complete modeling of all mold plates, cooling channels, slides, lifters, hot runner manifolds, leader pins, and limit switches.
2D Manufacturing Drawings & GD&T
Fully annotated 2D engineering drawings for every custom component, specifying precise tolerances, surface finishes, and heat treatments.
CAM Handover & T1 Trial Support
We deliver vendor-ready STEP and CAM files along with full BOMs, providing engineering support during CNC fabrication and initial T1 part sampling.
Industries We Serve with Injection Mold Design Services
Precision mold designs meeting rigorous regulatory, dimensional, and aesthetic standards across diverse industrial sectors.
Automotive & Mobility
Under-the-hood structural brackets, interior trim panels, lighting housings, and durable connector clips engineered with high-impact engineering resins.
Medical Devices & Diagnostics
Medical-grade cleanroom tooling designs for syringe components, diagnostic cartridges, luer locks, and surgical instrument enclosures.
Consumer Electronics & Devices
Ultra-thin wall enclosures, smart device housings, snap-fit covers, and acoustic speaker grilles requiring zero cosmetic sink marks or gate blemishes.
Industrial & Heavy Equipment
Ruggedized enclosures, heavy-duty fluid control valves, pump impellers, and wear-resistant gear components made of reinforced polyamides.
Packaging & Caps/Closures
High-speed multi-cavity tooling for thin-wall food containers, flip-top beverage caps, threaded closures, and dispensing pumps.
Aerospace & Defense
Lightweight high-performance structural brackets and avionics enclosures molded from high-temp polymers such as PEEK, PEI (Ultem), and PPS.
Precision-Driven Injection Mold Design Services
We combine rigorous plastic tooling physics, advanced CAD modeling, and manufacturing realism to ensure your molds run trouble-free from day one.
Toolmaker-Minded CAD Engineers
Our designers have hands-on CNC, EDM, and toolmaking experience. We design molds that are practical to machine, assemble, and maintain.
Cycle Time & Profit Optimization
By optimizing cooling circuit turbulence and wall transitions, our mold designs routinely shave 15% to 35% off press cycle times.
Vendor-Neutral Ownership
You receive 100% native 3D CAD files, 2D drawings, and BOMs. You own all IP and can manufacture the mold with any tooling shop worldwide.
Comprehensive Mold Flow Guarantee
Every production tool layout is backed by extensive mold flow simulation to verify fill balance, sink prevention, and minimal warpage.
Common Questions About Injection Mold Design Services
Clear answers on engineering timelines, design deliverables, mold flow analysis, and tooling costs.
Related Tooling & Mechanical Engineering Services
Discover our comprehensive suite of precision engineering, custom machinery, and manufacturing capabilities.
Ready for High-Precision Injection Mold Design Services?
Upload your 3D CAD part model and requirements. Our senior tooling engineers will provide a detailed DFM review and injection mold design feasibility quote within 24 hours.
